What is the logic behind the filters on the Dispatcher page?

Modified on Sun, 29 Jun at 8:42 PM

Screenshot 2023-07-17 at 9.18.41 PM.png

Container Arriving On Vessel
- Vessel Eta date should exist between Default Date Range...
- Load Status should be Pending
- LFD AND Pickup APT should not exist
Released
- All of Container On Vessel conditions should be true
- Custom AND Freight both should be Released
On Hold
- All of Container On Vessel conditions should be true
- One of Custom OR Freight should be on Hold

Containers Need To Be Picked Up
- One of Last Free Days OR Containers At Port conditions should be true
LFD
- Load Status should be Pending OR Available
- LFD should exist between Default Date Range…
Pickup Apt
- Load Status should be Pending OR Available
- Pickup APT should exist between Default Date Range…

Containers Need To Be Delivered
- Load Status should be any of the status between Pending to Arrived at Return
- Delivery APT should exist between Default Date Range…
- Deliver Load event in routing should not have a driver assigned to it.
At Port
- Load Status should be one of the Pending, Available, Dispatched, Enroute to Pickup, Arrived at Pickup
- Delivery APT should exist between Default Date Range…
- Deliver Load event in routing should not have a driver assigned to it.
In Yard
- Load Status should be Dropped
- Delivery APT should exist between Default Date Range…
- Deliver Load event in routing should not have a driver assigned to it.

Containers Need To Be Returned
- Load Status should be Dropped
- One of Cut Off OR Return Day OR Return APT should exist between Default Date Range…
- Return Container event in routing should not have a driver assigned to it.
Ready
- All of Containers to Return conditions should be true
- Container should be Ready to Return
Not Ready
- All of Containers to Return conditions should be true
- Container is Not Ready to Return

Containers Dropped
- Load Status should be Dropped
In Yard
- Load Status should be Dropped
- If current Drop leg is
  - Drop after Pull → only consider if the Drop Location and Next Location are different.
  - Drop after Delivery → only consider if the Drop Location and Previous Location are different.
At Customer
- Load Status should be Dropped
- If current Drop leg is
  - Drop after Pull → only consider if the Drop Location and Next Location are same.
  - Drop after Delivery → only consider if the Drop Location and Previous Location are same.

Dispatched Loads
- Load Status should be one of the status from Dispatched to Before Completed (except Dropped status, Dropped status will be only considered if the driver is assigned to that load.)
- One of the following dates should exist between Default Date Range…
  - LFD
  - Pickup APT
  - Delivery APT
  - Return APT
  - Cut Off
  - Return Day
Finished Today
- Load Status should be Completed OR Dropped
  - If Completed, Load Completed Date should be of current day
  - If Dropped, Load Delivered Date should be of current day